Generator Automatic Synchronisation

Automatic generator control module. Microprocessor based and fully programmable with event logging and communications if required. Features are as follows: Functions And Protections REVERSE power | Dead Bus Sensing | Voltage matching | Frequency matching | Phase Angle Matching | Ramp control | Blend control | Circuit breaker closing ontract | Engine speed control Push buttons Start | Stop/ reset | Auto | Manual | Mute / Lamp test Also incorporated into control section * 1x5A automatic battery charger. * 1x4A battery charger mode switch - ' off' ' normal' and ' boost' 1xset of control and monitoring fuses * 2x slave relays ( fuel and starter) * 1x mergency stop push button. Test switch set of volts free contacts for ' generator running ' and ' generator fault' Load switching session( s) * 1x3 pole fixed pattern circuit breaker rated for the full rating of the generator output fitted with electronic overload and short circuit trips and auxilliaries. * 1xSet of generator input terminals * 1xCommon bus section * 1xSet of current transformers